HP XP RAID Manager Software - Manual (Page 124)

124 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
–quit Terminates interactive mode and exits the command.
–sort[–CM] Sorts the target devices in Serial#, LDEV# order.
The –sort–CM option displays the command devices
listed in the horcm.conf file.
A unitID is displayed with the Serial#.
When two or more command devices exist, this option
will show multiple device files linked to a command
device (an LDEV).
-sort[-CLIB] Displays the calculated BC Bitmap pages and unused
Bitmap pages. Sorts the specified special file (standard
input or argument) by Serial#, LDEV#.
NOTE: Identical LDEVs and command devices are not
used to calculate the Bitmap pages. LDEVs shared by
multiple ports are calculated as one LDEV.
STDINs or special files are specified as follows:
• HP-UX: /dev/rdsk/*, Solaris: /dev/rdsk/*s2 or c*s2,
• Linux: /dev/sd... or /dev/rd... ,/dev/raw/raw*.
• zLinux: /dev/sd... or /dev/dasd… or /dev/rd...
,/dev/raw/raw*.
• MPE/iX: /dev/..., "LDEV-"
• AIX: /dev/rhdisk* or /dev/hdisk* or hdisk*
• Digital or Tru64: /dev/rrz*c or /dev/rdisk/dsk*c or
/dev/cport/scp*
• DYNIX: /dev/rdsk/sd* or sd* for only unpartitioned
raw device
• IRIX64: /dev/rdsk/*vol or
/dev/rdsk/node_wwn/*vol/* or /dev/dsk/*vol or
/dev/dsk/node_wwn/*vol/*
• WindowsNT: hdX-Y, $LETALL, $Phys,
D:\DskX\pY, \DskX\pY