HP XP RAID Manager Software - Manual (Page 123)

RAID Manager command reference 123
The Seq# and LDEV# are provided via the SCSI
Inquiry command.
This option requires the HORCMINST variable to be
defined.
-gplba (Windows NT/2000/2003 only) Displays usable LBA on
physical drives.
-gplbaex (Windows 2003 SP1 only) This option is only for use
with a GPT disk and displays usable LBA on physical
drives in units of 512 bytes and is used to specify the
[slba]
and [elba] options for the raidvchkset
command.
–gvinf (Windows NT/2000/2003 only) Retrieves the LUN
signature and volume layout information by way of a
raw device file provided via STDIN or arguments. This
information is saved to a system disk file with the
format \WindowsDirectory\VOLssss_llll.ini where ssss
is the array serial number and llll is the LDEV#.
Normally, this option is used to save the LUN signature
and volume layout information after it has been written
(and before a paircreate).
–gvinfex (Windows 2003 SP1 only) This option is only for use
with a GPT disk and is the same as –gvinf except that it
is used to save the disk signature/GUID DiskId and
volume layout information after it has been written (and
before a paircreate).
–h Displays Help/Usage.
–inqdump Displays SCSI information in hexadecimal dump
format.
–inst (MPE/iX only) Used to make a device special file such
as /dev/ldev* by getting an LDEV number (ldev in
MPE/iX terminology) from the “LDEV–” field in the
dstat
command.