HP XP RAID Manager Software - Manual (Page 147)

147
command is executed on the paired logical volume (–d)
or group (–dg).
This option is effective without specification of the
–g group
option.
If the specified LDEV is listed in multiple device
groups, this applies to the first one encountered.
seq # LDEV # can be specified in hexadecimal (by the
addition of 0x) or decimal.
The command executes for the entire group unless the
–d pair_vol argument is specified.
–g group Specifies a group name in the RM instance
configuration file.
–h Displays Help/Usage and version information.
If used this argument must be specified at the beginning
of command arguments.
–q Terminates interactive mode and exits this command.
–z Makes this command enter interactive mode.
–zx (Not for use with MPE/iX or OpenVMS) Prevents using
RM in interactive mode.
Returned Values
This command sets either of the following returned values in exit(), which
allows you to check the execution results.
Normal termination
0. (OK. Data is consistent.)
Abnormal termination:
Other than 0. (For the error cause and details, refer to
the execution logs.)
Output Fields
Group The group name (dev_group) described in the
configuration definition file.