HP XP RAID Manager Software - Manual (Page 231)

231
sync
Write data to drives Windows NT/2000/2003 only
Description
The sync command writes unwritten data remaining on the
Windows NT/2000/2003 system to the logical and physical drives.
If the logical drives designated as the objects of the sync command is not
opened to any applications, then sync flushes the system buffer to a drive
and performs a dismount.
If the logical drives designated as the objects of the sync command are
already opened to any applications, then sync only flushes the system
buffer to a drive.
The sync command will accept a Volume{GUID} as well as the device
object name. If you specify a Volume{GUID}, then RM will convert the
Volume{GUID} to a device object name on execution.
Syntax
RM_command -x sync A: B: C: ...
RM_command -x sync all
RM_command -x sync drive#...
Windows 2000/2003 only:
RM_command -x sync volume#...
RM_command -x sync D:[\directory|\directory pattern]...
Arguments
RM_command Any general RM command.
.A:B:C: [\directory|\directory pattern] ...
Data is flushed to the specified logical (and the
corresponding physical) drives.