HP XP RAID Manager Software - Manual (Page 79)

Using RAID Manager 79
$HORCC_LOGSZ
This variable specifies a mazimum command log file
size in kilobytes. For example:
HORCC_LOGSZ=2048
When the specified maximum file size is reached, the
/HORCM/log*/horcc_HOST.log file is moved to
/HORCM/log*/horcc_HOST.oldlog.
If specified as “0” or unspecified, normal command
error logging occurs.
$HORCC_TRCSZ
Specifies the size of the command trace file in
kilobytes. If you do not specify a size, the default trace
size for CA commands is used. This default trace size is
the trace size used by CA.
The default trace size for CA commands can be
changed in real time by using the horcctl –d –s
command.
$HORCC_TRCLVL
Specifies the command trace level (between 0 and 15).
If you specify a negative value, the trace mode is
canceled. If you do not specify a level, the default trace
level for CA commands is used. This tracing is level 4
by default (or the CA level). You can change the default
trace level for CA commands in real time using the
horcctl –d –l command.
$HORCC_TRCBUF
Specifies the command trace mode. If you specify this
environment variable, data is written to the trace file in
nonbuffer mode. If you do not specify it, the default
trace mode for CA commands is used. This default is
buffered mode (or the CA trace mode). You can change
the default trace mode for CA commands in real time
using the horcctl –d –b command.