HP XP RAID Manager Software - Manual (Page 249)

249
-fe displays the serial numbers and LDEV numbers of
the external LUNs mapped to the LDEV for the target
volume.
This option displays the information above by adding
to last column, and then ignores the 80-column format.
Example:
# raidvchkdsp -g horc0 -v gflag -fe
Group ... TID LU Seq# LDEV# GI-C-R-W-S PI-C-R-W-S R-Time EM E-Seq# E-LDEV#
horc0 ... 0 20 63528 65 E E E E E E E E E E 0 - - -
horc0 ... 0 20 63528 66 E E E E E E E E E E 0 - - -
EM displays the external connection mode.
H = a mapped E-LUN hidden from the host.
V = a mapped E-LUN visible to the host
- = a unmapped E-LUN
BH = a mapped E-LUN hidden from the host with a
blocked LDEV
BV = a mapped E-LUN hidden from the host with a
blocked LDEV
B = an unmapped E-LUN with a blocked LDEV
E-Seq# displays the production (serial) number of the
external LUN. If it is unknown, the number will be
shown as “-”.
E-LDEV# displays the LDEV# of the external LUN. If
it is unknown, the number will be shown as “-”.
–v operation Specifies an operation that displays the each parameter
for validation checking.
Valid values for operation:
–v cflag
Displays all flags for checking regarding data block
validation for target volumes.