HP XP RAID Manager Software - Manual (Page 259)

259
Capacity(MB) : Displays the total capacity in the
SnapShot pool.
Seq# : Displays the serial number of the RAID.
Num : Displays the number of LDEVs configured for
the SnapShot pool.
LDEV# : Displays the number of the first LDEV
configured for the SnapShot pool.
–v errcnt
Displays the statistical information about errors on the
target volumes. Statistical information is cleared when
the individual flag for integrity checking is disabled.
Example
# raidvchkscan -p CL1-A -v errcnt
PORT# /ALPA/C TID# LU# Seq# Num LDEV# CFEC MNEC SCEC BNEC
CL1-A / ef/ 0 0 0 2332 1 0 0 0 0 0
CL1-A / ef/ 0 0 1 2332 1 1 0 0 0 0
CL1-A / ef/ 0 0 2 2332 1 2 0 0 0 0
CL1-A / ef/ 0 0 3 2332 1 3 0 0 0 0
CL1-A / ef/ 0 0 4 2332 1 4 0 0 0 0
CFEC displays the block size validation error count.
MNEC displays the block header validation error
count.
SCEC displays the block checksum validation error
count.
BNEC displays the block number validation error
count.
–v gflag
Display the flags for block data validation for target
volumes.
Example