HP XP RAID Manager Software - Manual (Page 227)

227
portscan
Display devices on designated ports Windows NT/2000/2003 only
Description
The portscan command displays the physical devices that are connected to
the designated port.
Syntax
RM_command –x portscan stringx ,y
–x portscan port0 ,n
Arguments
RM_command Any general RM command.
string Any alphabetic character string; provided for
readability.
x,y Specifies a range of port numbers.
Output Fields
Port The port number on the Windows NT/2000/2003
device adapter.
IID The initiator ID on the device adapter port.
PhId The BUS number in the device adapter port.
TId The target ID of the hard disk that connects on the
device adapter port.
For information about Fibre
Channel address conversion, see See Appendix , “Fibre
Channel addressing” .
LUN The logical unit number of the hard disk connected to
the device adapter port. This item shows LDEV# of the
partner that becomes a pair in the disk array.