HP XP RAID Manager Software - Manual (Page 175)

175
Output Fields
This command sets either of the following returned values in exit(), which
allows you to check the execution resultsThe command returns 0 upon
normal termination.
A nonzero return indicates abnormal termination. For the error cause and
details, see the execution logs.
Group The group name (dev_group) described in the
configuration definition file.
PairVol(L/R) The paired volume name (dev_name) of the group
described in the configuration definition file. L is the
local host. R is the remote host.
P,T#,L# (CA only) The port number, target ID, and LUN
described in the configuration definition file.
Port# (BC only) The port number, target ID, LUN, and MU#
ID described in the configuration definition file.
LU-M
Seq# The disk array serial number.
LDEV# The LDEV number.
P/S The (P-VOL, S-VOL) attribute of a volume.
Status The status of the paired volume.
Fence (CA only) The fence level of the paired volume.
Copy% The copy operation rate (identical for P-VOL and
S-VOL).
P-LDEV# Displays the LDEV# of a primary pair partner.
M=W (Valid for PSUS state only) In the P-VOL case, this
designates “suspended” with S-VOL R/W enabled.
In the S-VOL case, this designates that the S-VOL can
accept writes.