HP XP RAID Manager Software - Manual (Page 74)

74 HP StorageWorks Disk Array XP RAID Manager: User’s Guide
Setting the command log size (UNIX and Windows only)
Command execution error data is collected in the command log
($HORCC_LOG/horcc_HOST.log).
RM allows you to set a maximum size for this log. When the log reaches
the maximum size, the data is transferred to a different log.
($HORCC_LOG/horcc_HOST.oldlog).
You set the command log size by using either the command environment
variable $HORCC_LOGSZ (
see page 79) or a variable in the file,
/HORCM/logn/horcc_HOST.conf (n = instance number).
As illustrated in the table below, the difference between the environmental
variable and the HOST.conf file variable is the range of logging.
Environmental variable and horcc_HOST.conf results
/HORCM/log n /horcc_ HOST .conf file
Command log sizing is accomplished by setting a value for the variable
HORCC_LOGSZ, where the value is the desired HOST.log size. For
example
HORCC_LOGSZ=2048
$HORCC_LOGSZ horcc_HOST.conf Result
= value Logging within this APP
= 0 No logging within this APP
HORCC_LOGSZ = value Global logging within this RM instance
HORCC_LOGSZ = 0 No logging within this RM instance
unspecified unspecified
All command execution errors logged in
/HORCM/logn/horcc_HOST.log only
n = instance number