HP XP RAID Manager Software - Manual (Page 51)

Installation and configuration 51
HORCM_INST section
Description
The HORCM_INST section defines how RM groups link to remote RM
instances.
Syntax
HORCM_INST
device_group { host_name
| IP_address } { service_name |
service_number }
device_group Defined in the HORCM_DEV section. Each group
defined in HORCM_DEV must be represented in the
HORCM_INST section only once for every remote RM
instance.
host_name Host name of the host on which the remote instance
runs. The remote instance can run on the same host as
the local instance.
IP_address IP address of the host on which the remote instance
runs. The remote instance can run on the same host as
the local instance.
service_name Service name that was entered into the services file for
the remote instance.
service_number Service number that was entered into the services file
for the remote instance.
Example
The example below shows that the opposite side of the pairs contained
within the group called group1 are serviced by a RM instance residing on
host yellow that listens on a UDP port defined in /etc/services named
horcm0.
HORCM_INST
group1 yellow horcm0