Allied Telesis RAPIER I - Manual (Page 138)

138 QoS Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
Example output from the show qos port=1 command
show qos portgroup
Syntax SHow QOS PORTGroup[={group-list|ALL}]
Description This new command displays information about port groups .
Figure 40: Example output from the show qos portgroup command
Figure 41: Example output from the show qos portgroup=1 command
QOS Port Configuration
Port ...................... 1
Port Group ................ 1
Trunk Group ............... None
Policy Assigned ........... 1(all ports)
Default Queue ............. 2
Force Default Queue ....... No
Red Curve ................. 2
.
.
.
New parameters in output of the show qos port=1 command
Parameter Meaning
Port Group ID of the port group to which the port belongs.
Trunk Group ID of the trunk group to which the port belongs.
Parameter Meaning
PORTgroup Specifies a port group for which to display information.
Default: all
group-list Integer from 1 to 32 ( Figure 41 , Table 33 ).
ALL All port groups.
no value
Displays summary information about all port groups
(
Figure 40 , Table 33 ).
QOS Port Group Information
ID Description Policy Assigned Ports
-----------------------------------------------------------
1 Uplink None 1-2,5
2 1 10-20
Identifier . . . . . . . . 1
Description . . . . . . . Uplink
Policy Assigned to . . . . None
Ports . . . . . . . . . . 1-2,5