beautypg.com

Pppoe access concentrator, Command reference updates, Add ppp acservice – Allied Telesis RAPIER I User Manual

Page 47: Command changes

background image

Software Version 2.8.1

47

Software Version 2.8.1
C613-10477-00 REV B

PPPoE Access Concentrator

This release introduces the ability for the PPPoE Access Concentrator and a
PPPoE Client to be active simultaneously. You can now specify the interface to
which the PPPoE Access Concentrator should attach.

Command Changes

The following table summarises the modified commands:

Command Reference Updates

This section describes the changed portions of modified commands and output
screens. The new parameters and options are shown in bold for modified
commands.

add ppp acservice

Syntax

ADD PPP ACSERVICE=service-name TEMPLATE=ppp-template

[ACRADIUS={OFF|ON}] [MAXSESSIONS=1..512]

[ACINTerface={NONE|interface}]

where:

interface is an interface name formed by concatenating an interface type
and an interface instance (e.g. eth0). Valid interface types are ETH and
VLAN.

Description

This command adds a new PPP over Ethernet Access Concentrator service to
the router or switch. PPPoE hosts are able to connect to the router or switch
using this service.

To allow a PPPoE host to be defined on the router or switch as well as on an
Access Concentrator service, the acinterface parameter must be used. The
acinterface

parameter specifies the interface to be used by the Access

Concentrator service. If none is specified, the Access Concentrator service uses
all valid interfaces. A service can be offered on several interfaces, but it is
necessary to issue one add ppp acservice command for each interface. For

example:

add ppp acservice=bob template=1 acint=eth0

add ppp acservice=bob template=1 acint=vlan5

To offer the service on all the Ethernet interfaces only, there is no need to use
the acinterface parameter, as it defaults to none.

The acinterface parameter supercedes the now deprecated vlan parameter in
this command.

Command

Change

add ppp acservice

New acinterface parameter to supercede the now
deprecated vlan parameter.

delete ppp acservice

New acinterface parameter to supercede the now
deprecated vlan parameter.

set ppp acservice

New acinterface parameter to supercede the now
deprecated vlan parameter.

show ppp pppoe

New description for the interface parameter.

This manual is related to the following products: