Allied Telesis RAPIER I - Manual (Page 71)

Software Version 2.8.1 71
Software Version 2.8.1
C613-10477-00 REV B
Command Reference Updates
This section describes each new command and the changed portions of
modified commands and output screens. For modified commands and output,
the new parameters, options, and fields are shown in bold.
add ip filter
Syntax Traffic filter:
ADD IP FILter=0..999 ACtion={INCLude|EXCLude} SOurce=ipadd
[TYPE=TRAFfic] [SMask=ipadd]
[SPort={port-name|port-id}] [DEStination=ipadd
[DMask=ipadd]] [DPort={port-name|port-id}]
[ICMPCode={icmp-code-name|icmp-code-id}]
[ICmptype={icmp-type-name|icmp-type-id}]
[LOG={4..1600|Dump|Header|None}]
[OPtions={False|OFF|ON|NO|True|YES}]
[PROTocol={protocol|Any|Icmp|Ospf|Tcp|Udp}]
[SEssion={Any|Established|Start}] [SIze=size]
[ENTry=1..255]
Policy filter:
ADD IP FILter=0..999 POLIcy=0..15 SOurce=ipadd
[TYPE=POLIcy] [SMask=ipadd] [SPort={port-name|port-id}]
[DEStination=ipadd [DMask=ipadd]]
[DPort={port-name|port-id}]
[ICMPCode={icmp-code-name|icmp-code-id}]
[ICmptype={icmp-type-name|icmp-type-id}]
[LOG={4..1600|Dump|Header|None}]
[OPtions={False|OFF|ON|NO|True|YES}]
[PROTocol={protocol|Any|Icmp|Ospf|Tcp|Udp}]
[SEssion={Any|Established|Start}] [SIze=size]
[ENTry=1..255]
Priority filter:
ADD IP FILter=0..999 PRIOrity=P0..P7 SOurce=ipadd
[TYPE=PRIOrity] [SMask=ipadd]
[SPort={port-name|port-id}] [DEStination=ipadd
[DMask=ipadd]] [DPort={port-name|port-id}]
[ICMPCode={icmp-code-name|icmp-code-id}]
[ICmptype={icmp-type-name|icmp-type-id}]
[LOG={4..1600|Dump|Header|None}]
[OPtions={False|OFF|ON|NO|True|YES}]
[PROTocol={protocol|Any|Icmp|Ospf|Tcp|Udp}]
[SEssion={Any|Established|Start}] [SIze=size]
[ENTry=1..255]
Routing filter:
ADD IP FILter=0..999 ACtion={INCLude|EXCLude} SOurce=ipadd
[TYPE=ROUting] [ENTry=1..255] [SMask=ipadd]