Allied Telesis RAPIER I - Manual (Page 223)

Ethernet Protection Switching Ring (EPSR) purge epsr 25
purge epsr
Syntax PURge EPSR
Description This command destroys all EPSR instances, returning the EPSR module to its
status when it is first powered on.
Warning If the data VLANs of any EPSR instances are still configured in a ring
formation, purging EPSR could cause a loop in the network. To avoid creating
loops, take one or more of these steps before running this command:
■ disable the ports, using the disable switch port command.
■ unplug the ports.
■ delete the ports from the VLAN, using the delete vlan port command.
Examples
To purge all EPSRs, use the command:
pur epsr
Related Commands create epsr
show epsr