Enable ssh debug, Enable ssh server – Allied Telesis RAPIER I User Manual
Page 148
148
Secure Copy (SCP)
Release Note
Software Version 2.8.1
C613-10477-00 REV B
enable ssh debug
Syntax
ENAble SSH DEBug={SSH|SCP|ALL}
Description
This new command enables the SSH server debugging facility. If ssh is
specified, debugging is turned on for Secure Shell. If scp is specified,
debugging is turned on for Secure Copy. If all is specified, debugging for both
SSH and SCP is turned on. Debugging is disabled by default.
Example
To enable debugging of SCP, use the command:
ena ssh deb=scp
enable ssh server
Syntax
ENAble SSH SERver HOSTKey=key-id SERVERKey=key-id
[EXPirytime=0..168] [LOGintimeout=1..600]
[SCP={ENAbled|DISabled}]
Description
This command enables the Secure Shell server. The new scp parameter allows
you to enable or disable Secure Copy service for the Secure Shell.
Parameter
Description
SCP
Whether the SSH server supports SCP connections.
Default: enabled
ENAbled
Allows SCP connections
DISabled
Does not allow SCP connections