Set classifier – Allied Telesis RAPIER I User Manual

Page 120

120

Extension to Range of Classifier fields for x900 Switches

Release Note

Software Version 2.8.1
C613-10477-00 REV B

set classifier

Syntax

SET CLASSifier=rule-id

[other-options]

[MACSMask=macadd][MACDMask=macadd]

[TCPFlags={{Urg|Ack|Rst|Syn|Fin}[,...]|ANY}]

[ICmptype={Any|ECHORply|Unreachable|Quench|Redirect|

NAMEREq|NAMERPly|icmp-type}]

[ICMPCode={Any|FIlter|FRAGMent|FRAGReassm|HOSTComm|

icmp-code}]

[IGmptype={ANY|QUery|V1Report|DVmrp|PIMv1|CTRace|

MRAdvert|MRSolicit|MRTermination|igmp-type}]

[EIPBYTE01=byteoffset,bytevalue[,bytemask]]

[EIPBYTE02=byteoffset,bytevalue[,bytemask]]

[EIPBYTE03=byteoffset,bytevalue[,bytemask]]

[EIPBYTE04=byteoffset,bytevalue[,bytemask]]

[EIPBYTE05=byteoffset,bytevalue[,bytemask]]

[EIPBYTE06=byteoffset,bytevalue[,bytemask]]

[EIPBYTE07=byteoffset,bytevalue[,bytemask]]

[EIPBYTE08=byteoffset,bytevalue[,bytemask]]

[EIPBYTE09=byteoffset,bytevalue[,bytemask]]

[EIPBYTE10=byteoffset,bytevalue[,bytemask]]

[EIPBYTE11=byteoffset,bytevalue[,bytemask]]

[EIPBYTE12=byteoffset,bytevalue[,bytemask]]

[EIPBYTE13=byteoffset,bytevalue[,bytemask]]

[EIPBYTE14=byteoffset,bytevalue[,bytemask]]

[EIPBYTE15=byteoffset,bytevalue[,bytemask]]

[EIPBYTE16=byteoffset,bytevalue[,bytemask]]

where:

■

byteoffset is a decimal number in the range 0 to 65

■

bytevalue is a 2-digit hexadecimal number.

■

bytemask is a 2-digit hexadecimal number.

■

icmp-type is a decimal number in the range 0 to 255.

■

icmp-code is a decimal number in the range 0 to 255.

■

igmp-type is a 2-digit hexadecimal number.

Description

This command sets a packet matching rule that identifies a particular data
flow.

For descriptions of the new entry parameters, see the

create classifier

command on page 118

This manual is related to the following products:

x900-48FE