Allied Telesis RAPIER I - Manual (Page 168)

168 Firewall Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
Example To display counters for the SIP ALG’s activity on the router or switch, use the
command:
show fire sipa cou
SIP messages ignored since
start up or reset Total number of SIP messages received that the SIP ALG
ignored because the message was an unsupported type.
These messages are forwarded without the SIP ALG altering
them.
Table 45: Parameters in output of the show firewall sipalg counter command (cont.)
Parameter Meaning