Allied Telesis RAPIER I - Manual (Page 77)

Software Version 2.8.1 77
Software Version 2.8.1
C613-10477-00 REV B
show ip counter
Syntax SHow IP
COUnter[={ALL|ARP|CAChe|ICmp|INterface|IP|MUlticast|ROu
tes|SNmp|UDp}]
Description This command displays all or selected parts of the IP MIB. You can now specify
cache
as an option for the counter parameter. If all is specified or no option,
then all IP counters are displayed. The MIB can be selectively displayed by
specifying one of the options in the syntax.
Figure 19: Example output from the show ip counter=cache command
Type One of the following:
Forward
Local
GenBcast
SpcBcast
MultOsp
MultLmtd
MultNorm
MultLocl
Age Age of the entry, which increases over time, but is reduced
when the entry is used.
Count Number of times the entry was found.
Table 16: Parameters in output of the new show ip cache command (cont.)
Parameter Meaning
Cache Counters
hits ............... 304 rejects .............. 0
deletes .............. 0
Table 17: Parameters in output of the show ip counter=cache command
Parameter Meaning
hits Number of times that an entry was found in the cache.
rejects Number of times that an entry could not be added to the
cache.
deletes Number of entries removed from the cache before they
timed out.