Show classifier – Allied Telesis RAPIER I User Manual

Page 121

Software Version 2.8.1

121

Software Version 2.8.1
C613-10477-00 REV B

show classifier

Syntax

SHow CLASSifier=rule-id

[other-options]

[MACSMask=macadd][MACDMask=macadd]

[TCPFlags={{Urg|Ack|Rst|Syn|Fin}[,...]|ANY}]

[ICmptype={Any|ECHORply|Unreachable|Quench|Redirect|

NAMEREq|NAMERPly|icmp-type}]

[ICMPCode={Any|FIlter|FRAGMent|FRAGReassm|HOSTComm|

icmp-code}]

[IGmptype={ANY|QUery|V1Report|DVmrp|PIMv1|CTRace|

MRAdvert|MRSolicit|MRTermination|igmp-type}]

[EIPBYTE01=byteoffset,bytevalue[,bytemask]]

[EIPBYTE02=byteoffset,bytevalue[,bytemask]]

[EIPBYTE03=byteoffset,bytevalue[,bytemask]]

[EIPBYTE04=byteoffset,bytevalue[,bytemask]]

[EIPBYTE05=byteoffset,bytevalue[,bytemask]]

[EIPBYTE06=byteoffset,bytevalue[,bytemask]]

[EIPBYTE07=byteoffset,bytevalue[,bytemask]]

[EIPBYTE08=byteoffset,bytevalue[,bytemask]]

[EIPBYTE09=byteoffset,bytevalue[,bytemask]]

[EIPBYTE10=byteoffset,bytevalue[,bytemask]]

[EIPBYTE11=byteoffset,bytevalue[,bytemask]]

[EIPBYTE12=byteoffset,bytevalue[,bytemask]]

[EIPBYTE13=byteoffset,bytevalue[,bytemask]]

[EIPBYTE14=byteoffset,bytevalue[,bytemask]]

[EIPBYTE15=byteoffset,bytevalue[,bytemask]]

[EIPBYTE16=byteoffset,bytevalue[,bytemask]]

where:

■

byteoffset is a decimal number in the range 0 to 65

■

bytevalue is a 2-digit hexadecimal number.

■

bytemask is a 2-digit hexadecimal number.

■

icmp-type is a decimal number in the range 0 to 255.

■

icmp-code is a decimal number in the range 0 to 255.

■

igmp-type is a 2-digit hexadecimal number.

■

macadd is an Ethernet six-octet MAC address, expressed as six pairs of
hexadecimal digits delimited by hyphens.

Description

This command displays information about the specified classifier or classifiers,
and packet matching rules.

For descriptions of the new entry parameters, see the

create classifier

command on page 118

This manual is related to the following products:

x900-48FE