Allied Telesis RAPIER I - Manual (Page 76)

76 Internet Protocol (IP) Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
show ip cache
Syntax SHow IP CAChe
Description This new command displays information about the IP address cache when
troubleshooting.
Figure 18: Example output from the show ip cache command
Arp wait timeout The amount of time the router or switch waits for a
response after it sends an ARP request message, in
seconds.
Table 15: Modified parameters on output of the show ip command.
IP Address Cache
------------------------------------------------------------------
Entries ................. 284
Max Entries ............. 284
Last Addition ........... 13:54:43 on Tuesday 21-Feb-2006
Last Rejection .......... -
Source Destination Interface Type Age Count
----------------------------------------------------------------------------
10.1.1.2 192.168.100.3 eth0-1 Forward 1 3
10.1.1.3 192.168.100.3 eth0-2 Forward 1 3
10.1.1.4 192.168.100.3 eth0-3 Forward 1 3
10.1.1.5 192.168.100.3 eth0-4 Forward 1 3
10.1.1.6 192.168.100.3 eth0-5 Forward 1 3
10.1.1.7 192.168.100.3 eth0-6 Forward 1 3
10.1.1.8 192.168.100.3 eth0-7 Forward 1 3
10.1.1.9 192.168.100.3 eth0-8 Forward 1 3
10.1.1.10 192.168.100.3 eth0-9 Forward 1 3
10.1.1.11 192.168.100.3 eth0-10 Forward 1 3
Table 16: Parameters in output of the new show ip cache command
Parameter Meaning
Entries Current number of entries in the cache.
Max Entries Maximum number of entries in the cache since the router
or switch restarted.
Last Addition Time and date that the last entry was added to the cache.
Last Rejection Time and date that an entry failed to be added to the cache
(possibly because the cache was full).
Source Source of the IP address.
Destination Destination of the IP address.
Interface Interface that the IP packet was received on.