Allied Telesis RAPIER I - Manual (Page 108)

108 BGP Enhancements Release Note
Software Version 2.8.1
C613-10477-00 REV B
set bgp peer
Syntax SET BGP PEer=ipadd [AUthentication={MD5|NONE}]
[CLIEnt={NO|YES}]
[CONnectretry={DEFault|0 .. 4294967295}]
[DEFaultoriginate={NO|YES}]
[DESCription={NONE|description}]
[EHOps={DEFault|1 .. 255}] [FASTFallover={NO|YES}]
[HOLdtime={DEFault|0|3 .. 65535}]
[INFilter={NONE|prefixlist-name}]
[INPathfilter={NONE|1 .. 99}]
[INRoutemap={NONE|routemap}]
[KEEpalive={DEFault|1 .. 21845}] [LOCal={NONE|1..15}]
[MAXPREFIX={OFF|1 .. 4294967295}]
[MAXPREFIXAction={Terminate|Warning}]
[MINAsoriginated={DEFault|0 .. 3600}]
[MINRouteadvert={DEFault|0 .. 3600}]
[NEXthopself={NO|YES}]
[OUTFilter={NONE|prefixlist-name}]
[OUTPathfilter={NONE|1 .. 99}]
[OUTRoutemap={NONE|routemap}] [PASSword=password]
[PRIVateasfilter={NO|YES}] [REMoteas=1 .. 65534]
[SENdcommunity={NO|YES}]
SET BGP PEer=ipadd [POLICYTemplate=1..30]
[AUthentication={MD5|NONE}] [DEFaultoriginate={NO|YES}]
[DESCription={NONE|description}]
[EHOps={DEFault|1 .. 255}] [FASTFallover={NO|YES}]
[PASSword=password] [REMoteas=1 .. 65534]
Example To remove the outroutemap for a BGP peer whose IP address is 192.168.1.1, use
the command:
set bgp pe=192.168.1.1 outr=none
Parameter Description
DESCription A description of the peer, which has no effect on its operation. The new
none option allows you to not specify a description, or remove a
previously specified description.
Default: none
INRoutemap The route map that filters and/or modifies prefixes from this peer. The
new none option allows you to not specify a route map, or remove a
previously specified route map.
Default: none.
OUTRoutemap The route map that filters and/or modifies prefixes sent to this peer. The
new none option allows you to not specify an route map, or remove a
previously specified route map.
Default: none