Allied Telesis RAPIER I - Manual (Page 190)

190 SNMP MIBs Release Note
Software Version 2.8.1
C613-10477-00 REV B
from the Learning state to the Forwarding state, or from the Forwarding
state to the Blocking state. The trap contains the following objects:
• mstpXstId, the MSTI or CIST instance
• mstpXstPortIndex, the index of the port in the mstpPortTable table
• mstpXstPortState, the new state of the port
Restart Log
The sysinfo Group of the Allied Telesis Enterprise MIB has the object identifier
prefix sysinfo ({ enterprises(1) alliedTelesyn(207) mibObject(8) brouterMib(4)
atRouter(4) 3 }), and contains objects that describe generic system information.
This software version defines the following new object in the sysinfo Group:
■ restartLog ({ sysinfo 11 }) contains the log messages of type REST/001
generated during the last restart.
Trap on Login Failures
The TTY Group of the Allied Telesis Enterprise MIB has the object identifier
prefix tty ({ enterprises(1) alliedTelesyn(207) mibObject(8) brouterMib(4)
atRouter(4) modules(4) 36 }), and contains objects and a trap for monitoring
login failures.
This software version defines the following new objects and trap in the
ttyTraps ({ tty 100 }) subtree:
■ loginFailureUser ({ ttyTraps 1 }) is the username that generated the login
failure.
■ loginFailureIPAddress ({ ttyTraps 2 }) is the IP address the failed login
attempt originated from.
■ loginFailureAttempts ({ ttyTraps 3 }) is the number of failed login attempts.
■ The loginFailureTrap trap ({ ttyTraps 11 }) is generated when a user is
locked out because the number of consecutive failed login attempts
exceeded the maximum allowed, and contains the following objects:
• loginFailureUser
• loginFailureIPAddress
• loginFailureAttempts
VLAN-based port state changes
The Switch Group of the Allied Telesis Enterprise MIB has the object identifier
prefix swi ({ enterprises(1) alliedTelesyn(207) mibObject(8) brouterMib(4)
atRouter(4) modules(4) 87 }), and objects that describe switch ports.
This software version defines the following new objects and trap in the Switch
Group:
■ swiPortVlanTable ({ swi 4 }) is a table of port/VLAN mappings, indexed
by swiPortVlanPortNumber and swiPortVlanVlanId. It contains the
following objects:
• swiPortVlanPortNumber, the index of a port on the router or switch.