Allied Telesis RAPIER I - Manual (Page 219)

Ethernet Protection Switching Ring (EPSR) disable epsr 21
disable epsr
Syntax DISable EPSR={epsr-name|ALL}
Description This command disables the EPSR protocol for either the specified EPSR
instance, or all EPSR instances.
Warning Disabling a VLAN that is still configured to a ring can cause loops and
subsequent broadcast storms within the network. To avoid creating loops, take
one or more of these steps before running this command:
■ disable the ports, using the disable switch port command on page 11-131.
■ unplug the ports.
■ delete the ports from the VLAN, using the delete vlan port command.
Examples To disable the EPSR instance called blue, use the command:
dis epsr=blue
Related Commands enable epsr
show epsr
Parameter Description
EPSR The EPSR instance to be disabled.
Default: no default
epsr-name The name of the EPSR instance. This can be a character
string, 1 to 15 characters long. Valid characters are
uppercase letters (A-Z), lowercase letters (a-z), digits (0-9),
the underscore character ("_"), the hyphen character ("-").
The epsr-name cannot be ALL.
ALL All EPSR instances.