Introduction – Allied Telesis RAPIER I User Manual
Page 4
4
Introduction
Release Note
Software Version 2.8.1
C613-10477-00 REV B
Introduction
Allied Telesis announces the release of Software Version 2.8.1 on the products
in the following table. This Release Note describes the new features and
enhancements.
The product series that each feature and enhancement applies to are shown in
“Overview of New Features” on page 6
. This Release Note should be read in
conjunction with the Installation and Safety Guide or Quick Install Guide,
Hardware Reference, and Software Reference for your router or switch. These
documents can be found on the Documentation and Tools CD-ROM packaged
with your router or switch, or:
This Release Note has the following structure:
1.
Upgrading to Software Version 2.8.1
This section lists the names of the files that may be downloaded from the
web site.
2.
Overview of New Features
This section lists the new features and shows the product families on which
each feature is supported.
3.
Descriptions of New Features
These sections describe how to configure each new feature.
Caution:
Information in this document is subject to change without notice and
does not represent a commitment on the part of Allied Telesis Inc. While every
effort has been made to ensure that the information contained within this
document and the features and changes described are accurate, Allied Telesis
Inc. can not accept any type of liability for errors in, or omissions arising from,
the use of this information.
Product series
Models
x-900-48FE
x-900-48FE, x-900-48FE-N
AT-9900
AT-9924T, AT-9924SP, AT-9924T/4SP
AT-8900
AT-8948
AT-9800
AT-9812T, AT-9816GB
Rapier i
Rapier 24i, Rapier 48i, Rapier 16fi
AT-8800
AT-8824, AT-8848
AT-8700XL
AT-8724XL, AT-8748XL
AT-8600
AT-8624T/2M, AT-8624PoE, AT-8648T/2SP
AR700
AR725, AR745, AR750S, AR770S
AR400
AR415S, AR440S, AR441S, AR442S, AR450S