Allied Telesis RAPIER I - Manual (Page 228)

30 show epsr Software Reference
Examples To show the current settings of the EPSR instance called blue, use the command
show epsr=blue
Related Commands add epsr datavlan
create epsr
delete epsr datavlan
destroy epsr
disable epsr
enable epsr
set epsr
set epsr port
First Port Status The status of the first ring port; either Unknown, Forwarding,
Down or Blocking. Unknown is displayed when the EPSR instance
is disabled. This parameter is only shown for a transit node.
First Port Direction Indicates connectivity of the first ring port to the Master node;
Upstream if this device is connected to the Master through the first
port, otherwise Downstream, or Unknown if the EPSR instance is
disabled. This parameter is only shown for a transit node.
Second Port The second ring port for the EPSR instance. This parameter is only
shown for a transit node.
Second Port Status The status of the second ring port; either Unknown, Forwarding,
Down or Blocked. Unknown is displayed when the EPSR instance
is disabled. This parameter is only shown for a transit node.
Second Port Direction Indicates connectivity of the second ring port to the Master node;
Upstream if this device is connected to the Master through the
second port, otherwise Downstream, or Unknown if the EPSR
instance is disabled. This parameter is only shown for a transit
node.
Master Node The MAC Address of the EPSR domain's master node. Unknown is
displayed if no messages have been received from the Master yet.
This parameter is only shown for a master node.
Table 1-2: Parameters displayed in the output of the show epsr command (cont.)
Parameter Meaning