Allied Telesis RAPIER I - Manual (Page 115)

Software Version 2.8.1 115
Software Version 2.8.1
C613-10477-00 REV B
show ipv6 mld
Syntax SHow IPV6 MLD INTerface=interface
Description The output of this command includes a new field.
Figure 31: Example output from the show ipv6 mld command
show mldsnooping
Syntax SHow MLDSNooping
Description The output of this command no longer displays the port members of the All
Routers group in the list of ports for groups other than the All Routers group.
An example of the previous output is shown in
Figure 32 , and the new output
is in Figure 33 . In this example, port 9 is in the All Routers group, and is shown
in bold.
MLD Protocol
--------------------------------------------------------------------------------
Status ............................. ENABLED
Robustness ......................... 2
Query Interval ..................... 125 secs
Query Response Interval ............ 10 secs
Startup Query Interval ............. 31 secs
Startup Query Count ................ 2
Last Listener Query Interval ....... 1 secs
Last Listener Query Count .......... 2
Interface: vlan100
--------------------------------------------------------------------------------
Version .......................... 2
V2 Draft Compatible .............. NO
Is querier ....................... YES
Link local address ............... fe80::0200:cdff:fe0a:4086
Table 29: New parameters in the output of the show ipv6 mld command
Parameter Meaning
V2 Draft Compatible Whether MLD can process MLDv2 reports that have an ICMP type
of 255 (YES), or reports that have an ICMP type of 143, as
specified by RFC 3810 (NO).