KYORITSU 6300 Instruction Manual - Manual (Page 98)

MODEL6300
7. 18
MODEL6300 Section 7 Integration value measurement
Section
7
The range is automatically assigned depending on the measured value.
The decimal point and unit are changed automatically.
Unit: Wh/ VAh
0.00 ~ 9999.99
10000.0 ~ 99999.9
100000 ~ 999999
1000.00 k ~ 9999.99 k
10000.0 k ~ 99999.9 k
100000 k ~ 999999 k
1000.00 M ~ 9999.99 M
10000.0 M ~ 99999.9 M
100000 M ~ 999999 M
1000.00 G ~ 9999.99 G
10000.0 G ~ 99999.9 G
100000 G ~ 999999 G
When the value exceeds 999999G,
segment becomes “ “.
However the saved data is not lost.
* Elapsed time TIME
Displayed time changes with time as follows.
Elapsed time
00:00:00 ~ 99:59:59 hour: minute: second
100:00 ~ 9999:59 hour: minute
10000 ~ 999999 hour
Ɣ Over-range indication/ others
* When the input voltage and the current exceeds the max display counts,
or mark is displayed on the LCD. In this case, accurate
measurement cannot be made.
* On the W range, when the P (active power) is shown by bars “- - - -”,
this means that the increment in electrical energy is insignificant.
Refer to “6-5-2 Over-range indication/ Bar indication” in this manual.