KYORITSU 6300 Instruction Manual - Manual (Page 115)

8. 17
MODEL6300
Section 8 Demand value measurement MODEL6300
‣‧ • ⁈ ‥ • • ⁈ • • ⁈ ‣ ⁂․⁉ ‣ ⁂‥ ⁉ ‥ ⁂‥⁉ ‥ ⁂… ⁉
‧ ″ ‣ • ″ ․ • ″ ‧ • ″ ‣ • • ″ ․ • • ″ ‧ •• ″ ‣ • • • ″
‣‧ • ⁈ ‥ • • ⁈ • • ⁈ ‣ ⁂․⁉ ‣ ⁂‥ ⁉ ‥ ⁂‥⁉ ‥ ⁂… ⁉
‧ ″ ‣ • ″ ․ • ″ ‧ • ″ ‣ • • ″ ․ • • ″ ‧ •• ″ ‣ • • • ″
‣‧ • ⁈ ‥ • • ⁈ • • ⁈ ‣ ⁂․⁉ ‣ ⁂‥ ⁉ ‥ ⁂‥⁉ ‥ ⁂… ⁉
‧ ″ ‣ • ″ ․ • ″ ‧ • ″ ‣ • • ″ ․ • • ″ ‧ •• ″ ‣ • • • ″
‣ ‧ • ‣ ‧ • ⁈ ‥ • • ‥ • • ⁈ • • ⁈ ‣ ⁂ ․ ⁉ ‣ ⁂ ‥ ⁉ ‥ ⁂‥ ⁉ ‥ ⁂… ⁉
‧ ″ ‧ ″ ‣ • ″ ․ • ″ ‧ • ″ ‣ • • ″ • • ″ ․ • ․ • • ″ • ″ ‧ • • ″ • • ″ ‣ • • ‣ • • • ″ • ″
For manual operation, the survey starts upon deleting the data in the internal
memory. When start time and date have been preset, the instrument goes
into stand-by mode.
Ɣ Limitations of saving (during a survey)
When the capacity of CF card or internal memory has been exceeded during
a survey; measurement continues but mark appears on the display
screen and further data will not be saved.
Press the START/STOP key 2 sec. or more and stop the survey once.
Refer to preceding page and delete the unnecessary file.
NOTE
* If the function switch is set to OFF before the closure of a survey, the
measured data may be lost.
* For further details about the capacity of the CF card and internal memory,
refer to “Section 9: CF card/ Internal memory” in this manual.