KYORITSU 6300 Instruction Manual - Manual (Page 82)

MODEL6300
7. 2
MODEL6300 Section 7 Integration value measurement
Section
7
Ɣ Prior to making a measurement
Ensuring your safety See “Safety warnings”.
Turning on the instrument
See “Section 3:
Preparation for measurement”.
Basic setting See “Section 4: Setting”.
Wiring See “Section 5: Wiring”.
Confirm the
instantaneous value
See “Section 6:
Instantaneous value measurement”.
Setting for integration
measurement
See “Section 4: Setting”.
Integration value
measurement
Ɣ Settings for integration measurement
Apart from basic settings the following settings are required for integration
measurement.
“Setting 09” Integration interval
“Setting 10” Integration start time & date
(measurement starts at set time & date)
“Setting 11” Integration stop time & date (measurement stops at set time & date)
“Setting 12” Reset of integration value