KYORITSU 6300 Instruction Manual - Manual (Page 56)

MODEL6300
4. 30
MODEL6300 Section 4 Setting
Section
4
4-3-25 “Setting 25” Saving settings
This instrument can memorize and recall the user’s preferred values for the
seven setting items listed below after inputting and saving the required values
in each of the listed seven settings.
* Using the
Cursor key whilst in the selection screen, select “Setting 25”.
* Press the ENTER key to enter setting change mode.
* Assign a tag from 01 and 20 with Cursor key.
* Then press the ENTER key.
* When required, the “tagged” settings may be loaded from “Setting 24”.
Available Tags: 01 ~ 20
Setting Item number
Setting 01 Wiring
Setting 02 Voltage range
Setting 03 Current range
Setting 04 Clamp sensor
Setting 05 VT ratio
Setting 06 CT ratio
Setting 08 Buzzer
NOTE
* When assigning a tag, the last inputted setting values always overwrite the
previous values.
* Tags can be selected from 01 and 20.
* All tags will return to the default values after system reset.
‣ ‧•⁈ ‥• •⁈ •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥ ⁂…⁉
‧ ″ ‣ •″ ․ •″ ‧• ″ ‣•• ″ ․•• ″ ‧• •″ ‣• ••″
‣ ‧•⁈ ‥• ‥• •⁈ ••⁈ ••⁈ ‣⁂ ․⁉ ․⁉ ‣⁂‥ ⁉ ‥⁂ ‥⁉ ‥ ⁂… ⁉
‧ ″ ‣ •″ ․ • ․ •″ ‧ • ‧ •″ ‣• •″ ․• • • •″ ‧ ••″ ‣• • • ••″
Tag