KYORITSU 6300 Instruction Manual - Manual (Page 39)

4. 13
MODEL6300
Section 4 Setting MODEL6300
‣ ‧•⁈ ‥• •⁈ •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥ ⁂…⁉
‧ ″ ‣ •″ ․ •″ ‧• ″ ‣•• ″ ․•• ″ ‧• •″ ‣• ••″
‣ ‧• ⁈ ‥ ••⁈ • •⁈ ‣⁂ ․⁉ ‣⁂ ‥⁉ ‥ ⁂‥ ⁉ ‥ ⁂…⁉
‧″ ‣ •″ ․• ″ ‧ •″ ‣ ••″ ․ ••″ ‧• •″ ‣•• •″
4-3-9 “Setting 09” Integration interval
The Integration interval is a preset period of time. Each time this interval
elapses, the data measured (in integration mode) during that interval, is
saved into the CF card or the internal memory.
Setting time
1/ 2/ 5/ 10/ 15/ 20/ 30 sec.
1/ 2/ 5/ 10/ 15/ 20/ 30 min.
1 hour
Default value 30 min.
* Using the Cursor key whilst in the selection screen, select “Setting 09”.
* Press the ENTER key to enter setting change mode.
* Previous setting (or default value: 30 min.) flickers. Press the Cursor key
to select any desired interval.
* Then press the
ENTER key.
Hour Minute Second