KYORITSU 6300 Instruction Manual - Manual (Page 46)

MODEL6300
4. 20
MODEL6300 Section 4 Setting
Section
4
‣ ‧ ‣ ‧• ⁈ • ⁈ ‥ • ‥ •• ⁈ • ⁈ • ••⁈ ‣ ⁂ ‣ ⁂․ ⁉ ․ ⁉ ‣⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥ ⁉ ‥ ⁉ ‥⁂ …⁉
‧″ ‧″ ‣• ‣• ″ ․• ․• ″ ‧•″ ‧•″ ‣• ‣• •″ •″ ․• ․• •″ •″ ‧•• ‧•• ″ ‣ •• •• •″ •″
‣ ‧• ⁈ ‥ •• ⁈ •• ⁈ ‣⁂ ․⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥⁂ …⁉
‧″ ‣• ″ ․ •″ ‧• ″ ‣ •• ″ ․ •• ″ ‧ •• ″ ‣ •• •″
4-3-16 “Setting 16” Demand target value
For further details about demand target value, refer to “Section 8: Demand
value measurement” in this manual. Target value can be set between
0.1W and 999.9GW.
0.1 ~ 999.9 W
0.1 ~ 999.9 kW
0.1 ~ 999.9 MW
Demand target value
0.1 ~ 999.9 GW
Default value 100.0kW
* Using the Cursor key whilst in the selection screen, select “Setting 16”.
* Press the ENTER key to enter setting change mode.
* Previous setting (or default value: 100.0kW) flickers. Press the Cursor key to
set any desired value and unit.
* Then press the
ENTER key.
Function of Cursor keys
To select the desired digit or unit parameter.
To change the value of selected digit or unit.
NOTE
* When the target value is set to 0, it is automatically changed into 100.0.