KYORITSU 6300 Instruction Manual - Manual (Page 42)

MODEL6300
4. 16
MODEL6300 Section 4 Setting
Section
4
‣ ‧•⁈ ‥• •⁈ •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥ ⁂…⁉
‧ ″ ‣ •″ ․ •″ ‧• ″ ‣•• ″ ․•• ″ ‧• •″ ‣• ••″
4-3-12 “Setting 12” Reset of integration value
The integration value (i.e. counters) can be reset as follows.
* Using the
Cursor key whilst in the selection screen, select “Setting 12”.
* Press the ENTER key to enter setting change mode.
* On the LCD, “oFF”(not reset) will flicker. Then change it to “on”(reset) with
Cursor key.
* Then press the ENTER key.
NOTE
* This setting is also available on Wh range.
For further details, refer to “Section 7: Integration value measurement”
in this manual.
* The default value is always “oFF”.
‣ ‧•⁈ ‧•⁈ ‥• ‥• •⁈ •⁈ •• •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁂ ‥⁉ ‥⁉ ‥ ⁂…⁉ …⁉
‧ ″ ‣ •″ •″ ․ •″ •″ ‧• ‧• ″ ‣•• ‣•• ″ ․•• ․•• ″ ‧• ‧• •″ •″ ‣• ‣• ••″ ••″
‣ ‧•⁈ ‧•⁈ ‥• ‥• •⁈ •⁈ •• •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁂ ‥⁉ ‥⁉ ‥ ⁂…⁉ …⁉
‧ ″ ‣ •″ •″ ․ •″ •″ ‧• ‧• ″ ‣•• ‣•• ″ ․•• ․•• ″ ‧• ‧• •″ •″ ‣• ‣• ••″ ••″
any of