KYORITSU 6300 Instruction Manual - Manual (Page 87)

7. 7
MODEL6300
Section 7 Integration value measurement MODEL6300
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″
7-2 Survey closure
There are two ways of closing a survey.
(1) Manual operation
Pressing
START/STOP key on Wh range for 2 sec. or more closes the
survey. This action also closes a survey started automatically at a preset time
and date. Upon survey closure the , (when CF card is present)
marks disappear and the LED status indicator goes off.
(2) Automatic operation (presetting the time and date)
This can be done by presetting the stop time and date on
SET UP range
(“Setting 11”). This method is available only when the survey is started at the
preset time and date. When the preset time and date have been
reached, , (when CF card is present) marks disappear and LED
status indicator goes off. The survey is then closed.
When a survey is closed manually or automatically, mark appears for
1 sec. This confirms that the file opened at the start of the survey has been
closed.
NOTE
* When data is saved to the internal memory, mark remains on.
(indicating that a file exists in the internal memory)