KYORITSU 6300 Instruction Manual - Manual (Page 85)

7. 5
MODEL6300
Section 7 Integration value measurement MODEL6300
Ɣ Automatic measurement at a preset time and date
Preset the start time and date on
SET UP range.
* Preset the start time and date on SET UP range. (“Setting 10”)
* Set the Function switch to Wh range, and press the START/STOP key.
* The file number screen is displayed for about 2 sec. (a file is opened),
followed by the measurement screen. The instrument goes into stand-by
mode. LED status indicator and mark flicker while the instrument is
in stand-by mode.
File number screen
(displayed for about 2 sec.)
Measurement screen
* If CF card is present, the CF card( ) mark; otherwise the internal
memory ( ) mark appears on the File number screen and measurement
screen. (See “Setting19”.)
* The survey starts at the preset time and date, and the mark and the
LED status indicator stop flickering and are permanently on.
‣ ‧ • ⁈ ‥ • •⁈ • •⁈ ‣ ⁂․⁉ ‣⁂‥ ⁉ ‥ ⁂‥ ⁉ ‥⁂… ⁉
‧ ″ ‣• ″ ․ •″ ‧• ″ ‣ • • ″ ․ • •″ ‧ • • ″ ‣ • • • ″
‣‧ • ⁈ ‥ • • ⁈ • • ⁈ ‣ ⁂․⁉ ‣ ⁂‥ ⁉ ‥ ⁂‥⁉ ‥ ⁂… ⁉
‧ ″ ‣ • ″ ․ • ″ ‧ • ″ ‣ • • ″ ․ • • ″ ‧ •• ″ ‣ • • • ″
LED status indicator
flickers