KYORITSU 6300 Instruction Manual - Manual (Page 28)

MODEL6300
4. 2
MODEL6300 Section 4 Setting
Section
4
4-1 List of setting items
List of setting items on SET UP range (25 items in total)
Item
No.
Setting item Mark Default value Clause
01 Wiring - 3P3W 4-3-1
02 Voltage range - 300V 4-3-2
03 Current range - 200A 4-3-3
04 Clamp sensor 500A 4-3-4
05 VT ratio 1 4-3-5
06 CT ratio 1.00 4-3-6
07 Time - 4-3-7
08 Buzzer on 4-3-8
09 Integration interval 30 min. 4-3-9
10 Integration start time & date Time 4-3-10
11 Integration stop time & date Time + Interval 4-3-11
12
Reset of integration value oFF (not reset) 4-3-12
13
Demand Interval
30 min. 4-3-13
14
Demand start time & date Time
4-3-14
15
Demand stop time & date Time + Interval 4-3-15
16
Demand target value 100kW 4-3-16
17 Demand inspection cycle 10 min. 4-3-17
18 Reset of demand value oFF (not reset) 4-3-18
19 Use of CF card - 4-3-19
20 Formatting CF card oFF (not formatted) 4-3-20
21 Deleting the data in CF card not.dEL (not deleted) 4-3-21
22
Deleting the data in
internal memory
not.dEL (not deleted)
4-3-22
23 System reset oFF (not reset) 4-3-23
24 Loading settings - 4-3-24
25 Saving settings - 4-3-25
Hereinafter, each setting is called as “Setting XX”.
NOTE
* For setting items 12, 18, 20, 21, 22 and 23, previous values are not displayed,
and the default value is always effective. Refer to the setting procedure of
each setting item.