KYORITSU 6300 Instruction Manual - Manual (Page 43)

4. 17
MODEL6300
Section 4 Setting MODEL6300
‣ ‧•⁈ ‧•⁈ ‥• ‥• •⁈ •⁈ •• •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁂ ‥⁉ ‥⁉ ‥ ⁂…⁉ …⁉
‧ ″ ‣ •″ •″ ․ •″ •″ ‧• ‧• ″ ‣•• ‣•• ″ ․•• ․•• ″ ‧• ‧• •″ •″ ‣• ‣• ••″ ••″
‣ ‧•⁈ ‥• •⁈ •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥ ⁂…⁉
‧ ″ ‣ •″ ․ •″ ‧• ″ ‣•• ″ ․•• ″ ‧• •″ ‣• ••″
4-3-13 “Setting 13” Demand interval
The demand interval is a preset period of time. Each time this interval elapses,
the data measured (in demand mode) during that interval, is saved into the CF
card or the internal memory.
Setting time
1/ 2/ 5/ 10/ 15/ 20/ 30 sec.
1/ 2/ 5/ 10/ 15/ 20/ 30 min.
1 hour
Default value 30 min.
* Using the Cursor key whilst in the selection screen, select “Setting 13”.
* Press the ENTER key to enter setting change mode.
* Previous setting (or default value: 30 min.) flickers. Press the Cursor key to
select any desired interval.
* Then press the
ENTER key.
Hour Minute Second