KYORITSU 6300 Instruction Manual - Manual (Page 107)

‣ ‧ • ⁈ ‥ • • ⁈ • • ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥ ⁂ ‥ ⁉ ‥ ⁂… ⁉
‧ ″ ‣ • ″ ․ • ″ ‧ • ″ ‣ • • ″ ․ • • ″ ‧ • • ″ ‣ • • • ″
‣ ‧ • ⁈ ‣ ‧ • ⁈ ‥ • • ⁈ ‥ • • ⁈ • • ⁈ • • ⁈ ‣ ⁂ ‣ ⁂․ ⁉ ․ ⁉ ‣ ⁂ ‣ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂‥ ⁉ ‥ ⁉ ‥ ⁂ ‥ ⁂… ⁉ … ⁉
‧ ″ ‧ ″ ‣ • ″ ‣ • ″ ․ • ″ ․ • ″ ‧ • ″ ‧ • ″ ‣ • ‣ • • ″ • ″ ․ • • ″ ․ • • ″ ‧ • • ″ ‧ • • ″ ‣ • • • ″ ‣ • • • ″
8-3 Survey initiation
There are two methods to start a survey.
(1) Manual operation
Pressing the
START/STOP key on DEMAND range for at least 2 sec. starts
measurement.
(2) Automatic operation (preset time and date)
Set the start time and date on
SET UP range (“Setting 14”), and then
press the START/STOP key on DEMAND range. The instrument goes into
stand-by mode, and the measurement starts at the preset time and date.
Ɣ To start measurement manually
* Press the
START/STOP key on DEMAND range at least 2 sec.
* File number screen is displayed for about 2 sec. (a file is opened), and then
the measurement screen is displayed. After that, measurement starts.
At this time, LED status indicator is on. In addition, and (**)
marks appear on the measurement screen.
(**) When CF card is present. When data is saved to the internal memory,
mark appears. (See “Setting19”.)
File number screen
(displayed for about 2 sec.)
Measurement screen
LED status indicator
is on
8. 9
MODEL6300
Section 8 Demand value measurement MODEL6300