KYORITSU 6300 Instruction Manual - Manual (Page 44)

MODEL6300
4. 18
MODEL6300 Section 4 Setting
Section
4
‣ ‧•⁈ ‥• •⁈ •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁉ ‥ ⁂…⁉
‧ ″ ‣ •″ ․ •″ ‧• ″ ‣•• ″ ․•• ″ ‧• •″ ‣• ••″
‣ ‧•⁈ ‧•⁈ ‥• ‥• •⁈ •⁈ •• •• ⁈ ‣ ⁂․ ⁉ ‣ ⁂‥ ⁉ ‥⁂ ‥⁂ ‥⁉ ‥⁉ ‥ ⁂…⁉ …⁉
‧ ″ ‣ •″ •″ ․ •″ •″ ‧• ‧• ″ ‣•• ‣•• ″ ․•• ․•• ″ ‧• ‧• •″ •″ ‣• ‣• ••″ ••″
4-3-14 “Setting 14 Demand start time and date
* Using the Cursor key whilst in the selection screen, select “Setting 14”.
* Press the ENTER key to enter setting change mode.
* The current time and date plus 1 min. are displayed on the LCD, and the
seconds digit will flicker.
* Change the time with the
Cursor key, and then press the ENTER key.
Time parameter Setting range
second 00 ~ 59
minute 00 ~ 59
hour 00 ~ 23
day 01 ~ 31 (*1)
month 01 ~ 12
year 00 ~ 99 (*2)
(*1) If a date outside this range is selected, a message “ ” is
displayed and it automatically changed to 00.
(*2) Only the last 2 digits are set. (e.g. 2004 ĺ 04)
Function of Cursor keys
To select the desired time parameter.
To change the value of selected time parameter.
Month
Hour Minute Second
Year Day
Year Month
Hour
Day
Minute Second