KYORITSU 6300 Instruction Manual - Manual (Page 111)

8. 13
MODEL6300
Section 8 Demand value measurement MODEL6300
‣ ‧ • ⁈ ‥ • • ⁈ • • ⁈ ‣ ⁂ ․ ⁉ ‣ ⁂ ‥ ⁉ ‥ ⁂‥ ⁉ ‥ ⁂… ⁉
‧ ″ ‣ • ″ ․ • ″ ‧ • ″ ‣ • • ″ ․ • • ″ ‧ • • ″ ‣ • • • ″
NOTE
* Turning off the instrument ( by setting the Function switch to OFF position)
will stop the survey, however the measured data may be lost. It is
recommended that a survey be stopped manually (
START/STOP key) or by
presetting the stop time and date.
* Manually starting a survey renders a preset stop time and date ineffective.
The survey has to be closed manually in this case.
* If the survey duration is shorter than the demand interval (“Setting 13”) the
measured data will not be saved.
* If the preset start time and date come after the preset stop time and date,
the survey cannot be done.
* Pressing the
START/STOP key at least 2 sec. releases the stand-by mode.
Then , (or ) marks disappear and the LED status
indicator goes off.