KYORITSU 6300 Instruction Manual - Manual (Page 100)

MODEL6300
8. 2
MODEL6300 Section 8 Demand value measurement
Section
8
Ɣ Before making a measurement
Ensuring your safety See “Safety warnings”.
Turning on the instrument
See “Section 3:
Preparation for measurement”.
Basic setting See “Section 4: Setting”.
Wiring See “Section 5: Wiring”.
Confirm the
instantaneous value
See “Section 6:
Instantaneous value measurement”.
Setting for demand
measurement
See “Section 4: Setting”.
Demand value
measurement
Ɣ Settings only for demand measurement
Basic setting and following settings are required for demand measurement.
“Setting 13” Demand interval
“Setting 14” Demand start time & date
(measurement starts at setting time & date)
“Setting 15” Demand stop time & date (measurement stops at setting time & date)
“Setting 16” Demand target value
“Setting 17” Demand inspection cycle
“Setting 18” Reset of demand value