KYORITSU 6300 Instruction Manual - Manual (Page 7)

MODEL6300
6
MODEL6300 Safety warnings
Safety warnings
This instrument has been designed, manufactured and tested according to IEC
61010: Safety requirements for Electronic Measuring apparatus, and delivered in
the best condition after passing quality control tests .
This instruction manual contains warnings and safety rules which have to be
observed by the user to ensure safe operation of the instrument and to
maintain it in safe condition. Therefore, read through these operating
instructions before using the instrument.
WARNING
Ɣ Read through and understand the instructions contained in this manual before
using the instrument.
Ɣ Keep the manual at hand to enable quick reference whenever necessary.
Ɣ The instrument is to be used only in its intended applications.
Ɣ Understand and follow all the safety instructions contained in the manual.
Ɣ Read the enclosed Quick manual after reading this instruction manual.
Ɣ As to the Clamp sensor use, refer to the instruction manual supplied with the
sensor.
It is essential that the above instructions are adhered to. Failure to follow the
above instructions may cause injury, instrument damage and/or damage to
equipment under test.
The symbol indicated on the instrument, means that the user must refer to the
related parts in the manual for safe operation of the instrument. It is essential to
read the instructions wherever the symbol appears in the manual.
DANGER is reserved for conditions and actions that are likely to cause
serious or fatal injury.
WARNING is reserved for conditions and actions that can cause serious or
fatal injury.
CAUTION is reserved for conditions and actions that can cause injury or
instrument damage.
DANGER
Ɣ Never make measurement on a circuit in which the electrical potential exceeds
AC600V.
Ɣ Do not attempt to make measurement in the presence of flammable gasses.
Otherwise, the use of the instrument may cause sparking, which can lead to an
explosion.
Ɣ Never attempt to use the instrument if its surface or your hand are wet.
Ɣ Do not exceed the maximum allowable input of any measuring range.
Ɣ Never open the Battery cover and CF card connector cover during a
measurement.
Ɣ Verify proper operation on a known source before use or taking action as a
result of the indication of the instrument.