KROHNE Summit 8800 Vol 2 - Manual (Page 94)

94 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 STREAM CONFIGURATION 06
Figure 85 Liquid Meter and K-factor
6 .4 .2 .2 K-factor
There are two choises for a K-factor: single point or K-factor curve. In case of a single K-factor,
fill in the amount of pulses per volume (e.g. pulses/m3 or pulses/gallons) and leave the correc-
tion method on “meter factor”
In case of a K-factor curve, change the correction method to “K-factor curve”. The single K-
factor will now not be used anymore and the page will change as follows: