KROHNE Summit 8800 Vol 2 - Manual (Page 135)

135 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 PROVER 10
Figure 137 Flow computer machine type
A prover may be combined with other streams, if desired.
In the main menu, a prover section will appear which is slightly different for liquid and for gas:
for gas the base- and line- density must also be configured.
Figure 138 Prover section for liquid and gas
Under the prover section, the user will find the following pages that will be used to configure the
prover functionality.
Pressure define how inlet and outline pressure is measured
Temperature define how inlet and outline temperature is measured
Alarm settings define the different alarms levels that will be checked during proving
Prover options define the type of prover and the parameters associated with it
Calculation define the calculations to be done during proving
Valve control define what valves should be controlled during proving
Line density (gas only) define how the line density for the prover should be calculated
Base density (gas only) define how the base density for the prover should be calculated
10 .1 .1 Prover pressure
Liquid Gas Steam
Defines how the pressure is measured and in what units.
10 .1 .1 .1 General