KROHNE Summit 8800 Vol 2 - Manual (Page 67)

67 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 HARDWARE DETAILS 05
The SUMMIT 8800 can receive 3 types of signals from these transmitters:
• HART
• Analog (4-20mA)
• Serial
For hardware signal details, see volume 1. See below configuration examples for Hart and
Analog (4-20 mA):
Figure 53 Pressure input selection
A pressure can also be read serially via a modbus slave link for instance from a SCADA system.
See volume 3 for details how to configure a modbus slave.
Figure 54 Pressure serial input selection