KROHNE Summit 8800 Vol 2 - Manual (Page 60)

60 www.krohne.com 08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 HARDWARE DETAILS 05
• Coriolis meters.
In most cases they will be connected as API level B-E, thus pulse 1 as the meter frequency and
possibly pulse 2 as a monitor frequency. See below for e.g. meter 1: turbine, meter 2: ultrasonic
and meter 4: Coriolis.
Figure 38 Setup of a meter pulse in Hardware selection
With digital input 2 of board 2, slot 3 used as the monitor frequency input for a turbine:
Figure 39 Setup of a monitor pulse in Hardware selection
Alternatively, a dual pulse might be connected as an API level A input. Select API 5.5 Level A for
input 1. Input 2 will automatically be used, since they are hardware coupled for this function.
Figure 40 Setup of a Level A dual pulse in Hardware selection