KROHNE Summit 8800 Vol 2 - Manual (Page 49)

49 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 CONFIGURATOR 04
Figure 20 Configuration version
NOTE:
The version must match the firmware loaded in the SUMMIT 8800. See Appendix 1: software
versions.
In the SUMMIT 8800 it is possible to define one to five different streams (or runs) plus a prover.
Each of these streams is independent from the other. Each can be any metering medium (gas,
liquid or steam) and any meter type: turbine, ultrasonic, Coriolis, orifice etc. (see next para-
graphs for details). Also each stream can have a different engineering unit: Metric or USC (US
Customary) or a mix of them.
The prover can be a master meter, but for liquid it can also be a small volume (or compact)
prover and a uni- or bidirectional prover.
For a new application select the flow computer type (machine type). This will normally be
“Standard”, but if proving is required select gas prover or liquid prover. Then select per stream,
the type of metering; in this case a gas turbine and a liquid Coriolis.
Figure 21 Configuration machine type