KROHNE Summit 8800 Vol 2 - Manual (Page 33)

33 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 CONFIGURATOR 04
3 .8 Stream, station and batch totals
A total for flow is calculated by multiplying the flow rate by the time difference between the cur-
rent and previous measurement. The SUMMIT 8800 keeps more than 25.000 different totals as a
combination of:
Qty Type total Code used
2 Metric The totals in metric units
USC The totals in US customary units
2 Positive + Measured in positive direction
Negative - Measured in negative direction
11 Running totals Totals until now
Current period 15 minutes cqh. Totals for the running15 minutes
Current period Hourly ch. Totals for the running hour
Current period Daily cd. Totals for the running day
Current period Monthly cm. Totals for the running month
Current period Quarterly cq. Totals for the running quarter
Previous period 15
minutes
pqh. Totals for the previous 15 minutes
Previous period Hourly ph. Totals for the previous hour
Previous period Daily pd. Totals for the previous day
Previous period Monthly pm. Totals for the previous month
Previous period Quarterly pq. Totals for the previous quarter
9 Unhaltable U All product measured
Normal N Measured during normal
conditions
Error E Measured during error conditions
Maintenance M Measured during maintenance
Tariff level 1 t1 Measured when in tariff level 1
Tariff level 2 t2 Measured when in tariff level 2
Tariff level 3 t3 Measured when in tariff level 3
Tariff level 4 t4 Measured when in tariff level 4
Tariff level 5 t5 Measured when in tariff level 5
11 Pulse count Pulses The amount of pulses counted
Line volume VLine Line volume for the main pulse
Monitor volume VMon Line volume for the monitor pulse
Volume before
normalisation
Vbc Volume after error curve
Volume after P/T
correction
Vbc Volume after P and T correction
Normalised volume VN Normalised volume
Normalised volume net VNnet Net normalised volume (product
only)