KROHNE Summit 8800 Vol 2 - Manual (Page 169)

169 www.krohne.com
08/2013 - MA SUMMIT 8800 Vol2 R02 en
SUMMIT 8800 BATCHING 13
Figure 189 Fixed batching trigger
Please note the inputs (start, preload complete and end) and the output (afterload complete) in
the diagram.
The parameters can be configured within this section.
Figure 190 Batching fixed batching selection
Use flow control valves Are flow control valves being used for batch control – yes or no
If yes:
Preload flow rate
Required flow rate prior to start of batch
Main load flow rate Required flow rate for main batch process
Afterload flow rate Flow rate at the end of the batch process
Preset batch size Product batch amount
Batch afterload duration Time required at afterload flow rate
Main load percentage Batch completion before afterload starts
Always use preload flow The option to use the flow measured during preload– yes or no
Stream selection
For station batching only, the streams involved can be selected: